This machine is used to fix the diameter and angle of polishing, polishing 0.01 ~ 1.0 mm diamond mold, this product has the characteristics of low noise, smooth operation, and each working head can rotate and vibrate independently, independent control, high production efficiency.
1. Processing die hole diameter range: 0.01-1.0 mm
2. Mold base speed adjustable: 0-2000 rpm
3. Up and down vibration speed adjustable: 0-230 times / min
4. Mold base angle adjustable: ≤ 20
5. Polishing stroke: 30mm
6. The upper and lower rocker arms can move left and right for better cable-stayed angle
7. This machine adopts German brand Jess motor and electrical appliances
8. Power consumption: 120W * 8
9. Voltage: AC220 V, 50 Hz
Through the up and down reciprocating movement of the metal wire (coated with oil polishing abrasive) penetrating into the die hole and the die disc driving the die to rotate, the sizing and angle polishing can be achieved
1. Connect the power supply, and need to be grounded, turn on the power switch;
2. Clean the die plate and die cavity, put the rotten thread into the die hole, put the die in the die plate, and tighten the cap;
3. Pull out the polishing line, fix the upper end on the upper clip, pull the lower handle to fix the polishing line on the lower clip as needed, release the handle, and the polishing line will be tensioned automatically
4. Turn on the knob and vibration switch, and the governor will adjust to the required speed. If timing is required, turn on the timer switch and set the required time of company A.
5.Equipment composition list and accessories
| Xp-iv new polishing machine | 1 |
| Product description | 1 |
| Qualification certificate of product inspection | 1 |